MindStudy - MindStudy

Question:

Published on: 23 June, 2022

Write short note on LVDT

Answer:

Principle of LVDT:

LVDT works under the principle of mutual induction, and the displacement which is a non-electrical energy is converted into an electrical energy. And the way how the energy is getting converted is described in working of LVDT in a detailed manner.

LVDT consists of a cylindrical former where it is surrounded by one primary winding in the centre of the former and the two secondary windings at the sides. The number of turns in both the secondary windings are equal, but they are opposite to each other, i.e., if the left secondary windings is in the clockwise direction, the right secondary windings will be in the anti-clockwise direction, hence the net output voltages will be the difference in voltages between the two secondary coil. The two secondary coil is represented as S1 and S2. Esteem iron core is placed in the centre of the cylindrical former which can move in to and fro motion as shown in the figure. The AC excitation voltage is 5 to 12V and the operating frequency is given by 50 to 400 HZ.

Working of LVDT:

Let’s study the working of LVDT by splitting the cases into 3 based on the iron core position inside the insulated former.

Case 1: On applying an external force which is the displacement, if the core reminds in the null position itself without providing any movement then the voltage induced in both the secondary windings are equal which results in net output is equal to zero i.e., Esec1-Esec2=0

Case 2: When an external force is applied and if the steel iron core tends to move in the left hand side direction then the emf voltage induced in the secondary coil is greater when compared to the emf induced in the secondary coil 2. Therefore the net output will be Esec1-Esec2

Case 3: When an external force is applied and if the steel iron core moves in the right hand side direction then the emf induced in the secondary coil 2 is greater when compared to the emf voltage induced in the secondary coil 1. Therefore the net output voltage will be Esec2-Esec1

Advantages of LVDT:

Infinite resolution is present in LVDT
High output
LVDT gives High sensitivity
Very good linearity
Ruggedness
LVDT Provides Less friction
Low hysteresis
LVDT gives Low power consumption.

Disadvantages of LVDT:

Very high displacement is required for generating high voltages.
Shielding is required since it is sensitive to magnetic field.
The performance of the transducer gets affected by vibrations
It is greatly affected by temperature changes.

Applications of LVDT:

LVDT is used to measure displacement ranging from fraction millimeter to centimetre
Acting as a secondary transducer, LVDT can be used as a device to measure force, weight and pressure, etc.

Subjects

Analog Communication Basic Electrical Engineering Radio Frequency and Microwave Engineering Power Electronics Electrical Engineering Management

Trending

In a certain current transformer, the following data is obtained. Nominal ratio = 25/5A, Turn ratio = 3, primary terns = 40, secondary turns = 120, secondary resistance = 0⋅16z, secondary reactance = 0⋅195Ω, secondary burden = 15 VA, Burden power factor = 0⋅7, secondary terminal voltage = 3V.

Find ratio & phase angle errors. The magnetising and loss ampere turns corresponding to an emf of 4⋅26V are13 & 10⋅1 respectively.

27 June, 2022

Explain the principle of operation of a digital frequency meter.

27 June, 2022

Write short note on LVDT

23 June, 2022

A single phase kWhr meter makes 500 revolutions per kWhr. It is found on testing that it is making 40 revolutions in 58.1 seconds at 5kW load. Find out the percentage of error.

23 June, 2022

What is lissajous pattern? Explain how phase & frequency can be measured using this figures.

28 June, 2022