MindStudy - MindStudy

Question:

Published on: 23 June, 2022

What is the function of delay time?

Answer:

The delay Line retards the arrival of the input waveform at the vertical deflection plates until the trigger and time base circuits start the sweep of the beam. The delay line produces a delay of 0.25 microsecond so that the leading edge of the input waveform can be viewed even though it was used to trigger the sweep.

Subjects

Radio Frequency and Microwave Engineering Electrical Engineering Management Power Electronics Analog Communication Basic Electrical Engineering

Trending

How that driving torque in a moving iron instrument is given by \(\theta = \frac{1}{2K}i^2\frac{\text{d}L}{\text{d}\theta}\) . Where the symbols have their usual meaning.

27 June, 2022

A Wheatstone bridge has the following resistances : AB = 200Ω, BC = 20Ω, CD = 8Ω & DA = 100Ω. A galvanometer of 40Ω is connected across BD. Find the current through the galvanometer when 20V is applied across A.C.

16 September, 2024

In a certain current transformer, the following data is obtained. Nominal ratio = 25/5A, Turn ratio = 3, primary terns = 40, secondary turns = 120, secondary resistance = 0⋅16z, secondary reactance = 0⋅195Ω, secondary burden = 15 VA, Burden power factor = 0⋅7, secondary terminal voltage = 3V.

Find ratio & phase angle errors. The magnetising and loss ampere turns corresponding to an emf of 4⋅26V are13 & 10⋅1 respectively.

27 June, 2022

Explain the worming of Anderson’s bridge with a neat sketch. Derive the required expression for obtaining the unknown inductance.

16 September, 2024

Explain the functional block diagram of CRO with neat diagram.

28 June, 2022